Back to top
Digital Motor Checker EMC-28N Digital Motor Checker EMC-28N
Digital Motor Checker EMC-28N
Digital Motor Checker EMC-28N

Digital Motor Checker EMC-28N

Product Details:

  • Product Type Digital Motor Checker EMC-28N
  • Color Green
  • Dimension (L*W*H) 237x131x45 Millimeter (mm)
  • Weight 700 Grams (g)
  • Click to View more
X

Digital Motor Checker EMC-28N Product Specifications

  • 237x131x45 Millimeter (mm)
  • 700 Grams (g)
  • Green
  • Digital Motor Checker EMC-28N

Product Description

 

Digital Motor Checker EMC-28N

 


Features

Insulation Resistance (IR) Measurement

Detects blow holes or cracks in the Rotor bar without dismantling the rotor

Inductance Measurement of the winding

Low resistance measurement of the winding

Identifies open and short circuits / loose Connections in a winding coil

Identifies inter tern shorts

Simple operation accurate & quick assessment of motor condition.

Noise (Mechanical sounds detection) for easy location of machinery noise in industrial Environments

Very handy

Battery Condition of Instrument

Low battery Indication

Light Weight PREDICTIVE MAINTENANCE: Regular testing can identify developing faults before a failure occurs. All measurement data can be trended for predictive maintenance condition monitoring. By making proactive repairs and eliminating unscheduled down- time, plant productivity is greatly improved. EMC-28N is a Digital portable diagnostic tool for Electrical Engineer and is used for quick on - site checks of electric motor and other three - phase machines.

A reduction in machine performance, such as inefficient operation or tripping of overloads, may indicate mechanical or electrical faults. If the fault is electrical the EMC-28N will immediately detects it, without dismantling the equipment. The instrument has three separate operating modes to measure different types of faults like fully insulation, open circuits / loose connections, short circuits, Ground faults and rotor defects. Motor insulation is tested with a high voltage at 500VDC supplied by the instrument.

NOISE: (Electronic stethoscope) Listening to machine sounds in order to determine the probable source of abnormal noise is one of the most widely used methods in maintenance departments across all branches of industry. Our electronic stethoscope is a practical and easy-to-use listening device that helps pinpoint the source of mechanical noise in a broad range of applications. Bearing condition, gear and pump noise, and electric relay operation are just a few of the many sounds which can be identified, amplified, and assessed.

Motor Checker EMC-28N finds the faults you can't see with any other hand held instrument

 Turn -to-turn , coil-to-coil and phase-to-phase faults

 Open phase

 Burned or contaminated winding

 Poor Connections

 Broken / Cracked rotor bars

 Grounded windings

 Cable faults.

 Mechanical Noise of Machines / Bearing, gear and pump noise

 Display: 3 1/2 LCD  Temp. 

 Operating Range: 0- 55 C 

 Size: 237x131x45 

 Weight: 700gms 

 Power: 1.5V x 6 AA size cells 

 Enclosure: Moulded in high impact ABS

Standard Supply: 

 Motor Checker EMC-28N 

 Test Leads - 1set 

 Noise Probe with Tip 

 Head Phone

 Batteries - 6nos

 Manual 

 Calibration Report & Warranty / Guarantee Certificate 

 Carry Case

Technical Details 

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Motor Checkers' category